Sony RM-AV2500T - Manual (Page 45)

45 GB
1
After Step 1 (page 44), while
pressing the Component Select
button (VCR), press the key you
want to teach repeatedly.
Each time the key is pressed, the
display is changed in order.
2
When the desired display
appears, release the Component
Select button.
3
Then follow Steps 3 to 6 (page
44).
Notes
• If you do not change the display of a key, the
default display is used.
• You cannot change the display of the keys
that are not framed with (the number
keys 0 to 9, +10 and ENTER).
To clear an alias key and button
1
After Step 1 (page 44), while
pressing the LIGHT button, press
the key or button you want to
erase.
The cleared key flashes together with
other settable alias keys.
2
Press COMMANDER OFF.
To clear all the alias keys at once
While pressing the LIGHT button, press
the Component Select button.
Note
The M1, M2 and M3 buttons are factory
set with alias keys. If you clear all the
alias keys, the M1, M2 and M3 button
alias keys are also cleared.
To restore the factory setting
1 While pressing COMMANDER OFF,
press the M1, M2 or M3 button.
2 Press the M1, M2 or M3 button twice
while pressing the LIGHT button.