Sony SRP-X700P - Manual (Page 16)

– 16 –
GROUP MUTING
Status of muting of REMOTE1 to 6 among the GROUP FADER is indicated by the 8-bit data.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 REMOTE6 REMOTE5 REMOTE4 REMOTE3 REMOTE2 REMOTE1
When the corresponding bit is ‘1’, it is is muted. When the corresponding bit is ‘0’, muting is released.
Bit-6 and bit-7 are fixed all the time.
LINE4 SELECT
It indicates which channel of A to F is being selected in the LINE4.
The following value is returned from the SRP-X700P.
SCENE RECALL
It indicates the scene No. that is being selected at present.
The following value is returned from the SRP-X700P.
When the value is “NONE” (30[H]), it indicates the state that any scene call has never been attempted after the power is turned on.
CHANNEL
OFF 30[H] (‘0’)
[H] (‘6’)
[H] (‘5’)
[H] (‘4’)
[H] (‘3’)
[H] (‘2’)
[H] (‘1’) A 31
B 32
C 33
D 34
E 35
F 36
SCENE No. SCENE No.
NONE 30[H] (‘0’) 11 3B[H] (‘;’)
1 31[H] (‘1’) 12 3C[H] (‘<’)
2 32[H] (‘2’) 13 3D[H] (‘=’)
3 33[H] (‘3’) 14 3E[H] (‘>’)
4 34[H] (‘4’) 15 3F[H] (‘?’)
5 35[H] (‘5’) 16 40[H] (‘@’)
6 36[H] (‘6’) 17 41[H] (‘A’)
7 37[H] (‘7’) 18 42[H] (‘B’)
8 38[H] (‘8’) 19 43[H] (‘C’)
9 39[H] (‘9’) 20 44[H] (‘D’)
10 3A[H] (‘:’)