Sony SRP-X700P - Manual (Page 29)

– 29 –
• REF LEVEL (10th byte)
This command is used to set the reference output level [dBu].
• Function ON/OFF (11th byte)
This command is used to turn ON/OFF the delay (DELAY), parametric equalizer (PEQ) and high-cut filter (HCF) with the 8-bit data.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 0 0 0 HCF PEQ DELAY
Set the corresponding bit to 1 to turn ON the delay (DELAY), parametric equalizer (PEQ) and high-cut filter (HCF). Set the
corresponding bit to 0 to turn them OFF.
Bit-3 to bit-7 are fixed all the time.
Caution
When the high-cut filter (HCF) is turned ON, the parameters that are set in PEQ11 are invalidated.
• Delay (45th byte)
This command is used to set the delay.
REF LEVEL
-10 30[H] (‘0’)
-5 3
3
3
5[H] (‘5’)
0 A[H] ‘:’
4 E[H] ‘>’
(
(
(
)
)
[ms] [m] [feet] [ms] [m] [feet]
0 0 0 30[H] (‘0’) 78.3 27 90.0 4B[H] (‘K’)
2.9 1 3.3 31[H] (‘1’) 81.2 28 93.3 4C[H] (‘L’)
5.8 2 6.7 32[H] (‘2’) 84.1 29 96.7 4D[H] (‘M’)
8.7 3 10.0 33[H] (‘3’) 87.0 30 100.0 4E[H] (‘N’)
11.6 4 13.3 34[H] (‘4’) 89.9 31 103.3 4F[H] (‘O’)
14.5 5 16.7 35[H] (‘5’) 92.8 32 106.7 50[H] (‘P’)
17.4 6 20.0 36[H] (‘6’) 95.7 33 110.0 51[H] (‘Q’)
20.3 7 23.3 37[H] (‘7’) 98.6 34 113.3 52[H] (‘R’)
23.2 8 26.7 38[H] (‘8’) 101.5 35 116.7 53[H] (‘S’)
26.1 9 30.0 39[H] (‘9’) 104.4 36 120.0 54[H] (‘T’)
29.0 10 33.3 3A[H] (‘:’) 107.3 37 123.3 55[H] (‘U’)
31.9 11 36.7 3B[H] (‘;’) 110.2 38 126.7 56[H] (‘V’)
34.8 12 40.0 3C[H] (‘<’) 113.1 39 130.0 57[H] (‘W’)
37.7 13 43.3 3D[H] (‘=’) 116.0 40 133.3 58[H] (‘X’)
40.6 14 46.7 3E[H] (‘>’) 118.9 41 136.7 59[H] (‘Y’)
43.5 15 50.0 3F[H] (‘?’) 121.8 42 140.0 5A[H] (‘Z’)
46.4 16 53.3 40[H] (‘@’) 124.7 43 143.3 5B[H] (‘[’)
49.3 17 56.7 41[H] (‘A’) 127.6 44 146.7 5C[H] (‘\’)
52.2 18 60.0 42[H] (‘B’) 130.5 45 150.0 5D[H] (‘]’)
55.1 19 63.3 43[H] (‘C’) 133.4 46 153.3 5E[H] (‘^’)
58.0 20 66.7 44[H] (‘D’) 136.3 47 156.7 5F[H] (‘_’)
60.9 21 70.0 45[H] (‘E’) 139.2 48 160.0 60[H] (‘`’)
63.8 22 73.3 46[H] (‘F’) 142.1 49 163.3 61[H] (‘a’)
66.7 23 76.7 47[H] (‘G’) 145.0 50 166.7 62[H] (‘b’)
69.6 24 80.0 48[H] (‘H’) 147.9 51 170.0 63[H] (‘c’)
72.5 25 83.3 49[H] (‘I’) 150.8 52 173.3 64[H] (‘d’)
75.4 26 86.7 4A[H] (‘J’)