Sony SRP-X700P - Manual (Page 36)

– 36 –
When you specify the scene No.(31[H] (‘1’) through 44[H] (‘D’)), parameters of the subsequent 2nd through 8th bytes are written in the
scene memory.
• Scene No. (1st byte)
This command is used to specify the scene No.
• MIC MUTING (2nd byte)
This command is used to specify muting of the MIC input channels with the 8-bit data.
When you want to set the MUTING status, set the corresponding bit to 1. When you want to cancel MUTING, set the corresponding bit
to 0.
Bit-6 and bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 MIC6/ MIC5/ MIC4 MIC3 MIC2/ MIC1/
LINE2 LINE1 WL2 WL1
• LINE MUTING (3rd byte)
This command is used to specify muting of the LINE input channels with the 8-bit data.
When you want to set the MUTING status, set the corresponding bit to 1. When you want to cancel MUTING, set the corresponding bit
to 0.
Bit-2 to bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 0 0 0 0 LINE4 LINE3
• LINE OUTPUT1-6 MUTING (4th byte)
This command is used to specify muting of the LINE OUTPUT1 to 6 channels with the 8-bit data.
When you want to set the MUTING status, set the corresponding bit to 1. When you want to cancel MUTING, set the corresponding bit
to 0.
Bit-6 and bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 OUT6 OUT5 OUT4 OUT3 OUT2 OUT1
• LINE OUTPUT7,8/REC OUT1,2 /SPEAKER OUTPUT1,2 MUTING (5th byte)
This command is used to specify muting of the LINE OUTPUT7,8, REC OUT1,2, SPEAKER OUTPUT1 and 2 with the 8-bit data.
When you want to set the MUTING status, set the corresponding bit to 1. When you want to cancel MUTING, set the corresponding bit
to 0.
Bit-6 and bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 SPEAKER SPEAKER REC REC OUTPUT8 OUTPUT7
OUTPUT2 OUTPUT1 OUT2 OUT1
SCENE No. SCENE No.
1 31[H] ( ‘1’ ) 11 3B[H] ( ‘;’ )
2 32[H] ( ‘2’ ) 12 3C[H] ( ‘<’ )
3 33[H] ( ‘3’ ) 13 3D[H] ( ‘=’ )
4 34[H] ( ‘4’ ) 14 3E[H] ( ‘>’ )
5 35[H] ( ‘5’ ) 15 3F[H] ( ‘?’ )
6 36[H] ( ‘6’ ) 16 40[H] ( ‘@’ )
7 37[H] ( ‘7’ ) 17 41[H] ( ‘A’ )
8 38[H] ( ‘8’ ) 18 42[H] ( ‘B’ )
9 39[H] ( ‘9’ ) 19 43[H] ( ‘C’ )
10 3A[H] ( ‘:’ ) 20 44[H] ( ‘D’ )