Sirius Satellite Radio STAREMATE REPLAY ST2 User Manual

Page 12

Advertising
background image

ST2 Starmate Replay User and Installation Guide

12

Double check that the location of the antenna and
rubber antenna cable cover/tail are correct, and
continue to press firmly down on rubber antenna
cable cover/tail for another 30 seconds.

Note: At room temperature (68 degrees), maximum
adhesion usually occurs within 72 hours. During this
period, avoid car washes and other contact with the
antenna and rubber antenna cable cover/tail.

RUBBER ANTENNA
CABLE COVER/TAIL

VEHICLE

MOUNTING SURFACE

Connecting the Receiver
Connect the antenna and cigarette lighter power
adapter to the Receiver to complete the installation.
The illustration below shows the location of the
antenna and power connectors on the Receiver.

ANTENNA

POWER

AUDIO OUT

FM OUT

Plug the cigarette lighter power adapter cord into
your vehicle’s cigarette lighter, and turn the Receiver
On by pressing the power button. Once you have
verified that Receiver has powered on, you can
proceed with activating your SIRIUS subscription.

Advertising