Sirius Satellite Radio STAREMATE REPLAY ST2 - Manual (Page 44)

ST2 Starmate Replay User and Installation Guide
44
and down buttons to highlight “Yes”, and press
the select button.
Clear All Memory?
Yes Yes
No
The S-Seek memory is now erased.
To exit the Memory Options menu, press the MENU
button.
Auto Select
Auto Select chooses whether th
e Receiver
immediately tunes to a c hannel when a channel is
highlighted, or whether you must first press the
select button in order to tune to a highlighted
channel in any of the list modes. Turn Auto Select
On if you would like the Receiver to automatically
tune to the highlighted channel without you having to
press the select button. This will allow you to quickly
listen to all the available programming in any
displayed channel list.
The default setting for Auto Select is Off, meaning
that you must press the select button to tune to a
channel in a listing.
To change Auto Select setting to On or Off, use the
channel up or down buttons to highlight “On” or
“Off”, and press the select button.
Auto Select
On
Off Off
To exit the Auto Select menu, press the MENU
button.
Audio Level
The Audio Level setting adjusts the level of the audio
output of the Receiver.
To adjust the audio level, use the channel up and
down buttons to change the audio level. The bar
graph will move to indicate the change.
- + - +
Audio Level
To exit the Audio Level menu, press the MENU
button.