Sirius Satellite Radio STAREMATE REPLAY ST2 - Manual (Page 29)

ST2 Starmate Replay User and Installation Guide
29
3. To enable S-Seek alerts, use the channel up and
down buttons to highlight the “Seek On” option
and press the select button. The S-Seek function
is now enabled.
When the S-Seek option is enabled, whenever the
Receiver is turned on, it automatically searches the
incoming channels to determine if a match exists
with the program information stored in the S-Seek
memory. If one or more matches are found, a pop-up
screen momentarily appears for 2 seconds and
displays “S-Seek Alert” or “Game Alert”, depending
upon which type of a match was found. An audible
beep tone will also be heard indicating that a match
was found.
001
Artist Name Artist Name
Song Title Song Title
Category 12:00P A
S-Seek Alert
Channel Name 001
Artist Name Artist Name
Song Title Song Title
Category 12:00P A
Game Alert
Channel Name
The Receiver then displays the S-Seek Alert or My
Game Zone screen, which displays a list of the
current matches. No alert is provided for the currently
selected channel.
SIRIUS SEEK LIST
121 Artist Name/ Song 121 Artist Name/ Song
156 Artist Name
MY GAME ZONE
100 Giants @ Cowboys 100 Giants @ Cowboys
123 Bulls @ Cavaliers
MY GAME ZONE
100 NFL NYG 7 DAL 3 100 NFL NYG 7 DAL 3
123 NBA BUL 77 CLE 73
You can now select the artist, song, or sports game
that you wish to tune to by using the channel up and
down buttons to highlight your selection from the list,
and then pressing the select button. If no selection
is made within 10 seconds, the Receiver will revert
to the last active display mode. NOTE: Play of the
current selection will continue until a new selection
is chosen from the S-Seek or My Game Zone list.
Jump Button
The Receiver has a special preset button called the
Jump button, which is identified by the
icon.
The Jump button is used to quickly tune to a
channel that is accessed frequently and temporarily
such as a traffic channel, a weather channel, a