Sirius Satellite Radio STAREMATE REPLAY ST2 - Manual (Page 37)

ST2 Starmate Replay User and Installation Guide
37
FM Preset Button
The Receiver has a special button called the FM
Preset button, which is identified by the
icon.
When the FM Preset button is pressed, the
Receiver turns on the built-in FM transmitter and
begins transmitting on the next frequency from the
FM frequency preset list. A screen will be displayed
for 3 seconds showing the currently selected FM
frequency. When the FM transmitter is turned on, an
FM radio tuned to the same FM frequency will
receive the currently tuned SIRIUS broadcast. Each
subsequent press of the FM Preset button advances
to the next frequency in the FM frequency preset list.
Using the FM Preset button, a quiet FM frequency
may be quickly tuned.
If no FM frequencies have been preset when the FM
Preset button is pressed, the Receiver will default to
a frequency of 88.1 MHz.
Pressing and holding the FM Preset button will
cause a list of the FM presets to be displayed.
FM Presets
FM1 88.1 MHz
FM2 <EMPTY> FM2 <EMPTY>
FM3 <EMPTY> FM3 <EMPTY>
FM4 <EMPTY> FM4 <EMPTY>
You can use the channel up and down buttons to
scroll through the FM preset list and highlight the
preset you wish to change, and press the Select
button to choose the preset. Use the channel up and
down buttons to highlight the frequency you wish to
select for the preset and press the select button.
The FM frequency will then be stored in the preset.
To select the preset and exit, press the MENU
button.
You may also change the FM presets by using the
FM Presets menu option of the Receiver. (Refer to
the FM Transmitter section in the Menu Options
section of this manual for instructions on
programming the FM frequency preset list.)
Menu Options
To enter the Menu Options page of the Receiver,
press the MENU button. The “Menu Options” list will
be displayed.