Sierra Wireless RAVEN 1X 20070914 - Manual (Page 142)

Raven 1x
137 20070914
update the MDN. Changes will automatically update the
Access Overload Class values unless specifically modified
using +WAOC command.
+WSID=[idx],[SID],[NID]
Set SID and NID. C3x11 and C3x11E only.
• idx=The location in the SID/NID list to store the values.
• sid=system ID
• nid=network ID
The new SID/NID values are committed to NV with the
+WCMT command (AT+WCMT=1). A maximum of 20 index
locations (0‐19) are supported. Error 22 is returned if the
specified index value is not in the valid range.
~NAMVAL=nam[,min,msid,sid,nid]
Tip: It is recommended to use the Setup Wizard for your carrier to
provision the modem.
Write account activation data. C3x10 and C3x10E only.
Following writing the values, the modem must be reset.
• nam=0
• min=phone number
• msid=second number
• sid=0 or the system ID
• nid=63355 or the network ID
Note: If ~NAMLCK has not been successfully executed, the modem
returns ERROR.
• nam=0
• min=phone number
• msid=second number
• sid=0 or the system ID
• nid=63355 or the network ID