Sierra Wireless RAVEN 1X 20070914 User Manual
Page 37
Activating your Raven on the Sprint Network
Rev 3.0B Feb.08
32
a.
Select Install to begin adding the driver for the Raven
to your computer.
Figure 3-19: Setup Wizard : DUN settings
b.
The COM port and speed should match the settings of
the Raven and where it will be connected (default
settings will be pre‐entered).
c.
Select Next to begin the driver installation.
d.
You will see a confirmation box from Microsoft
Windows to specify if you wish to install this driver on
your computer. Select Continue Anyway to install the
driver.
e.
When the driver is installed, you will return to the
Modem installation screen. The Raven should now be
listed (in addition to any other modem installed on
your computer).
f.
Click Next to continue to install the DUN configu‐
ration.
Figure 3-20: Setup Wizard : DUN connections
If you already have a DUN connection installed for a different
modem, it will be listed on the Dial‐up Networking
Connection screen.
g.
Select Add to create a new connection for the Raven.