Sierra Wireless RAVEN 1X 20070914 - Manual (Page 30)

Raven 1x
25 20070914
Figure 3-7: Setup Wizard MDN and MIN/MSID
The Wizard will check the signal strength of your Raven
(RSSI). Click Next to begin the activation process.
Note: The process may take a few minutes. Progress information will
display across the bottom.
Figure 3-8: Setup Wizard : Signal Test
Tip: If you have low signal, you may encounter difficulties activating
your modem. Try a different location or a different antenna to increase
your signal if it is -90 or lower (yellow to red bar).
• Static IP ‐ If you have a cellular account with a static IP
address, check this box if it is displayed.
Caution: If you do not have a static IP account and check the Static
IP box, you may not be able to activate your Raven or register on the
Sprint network.