Soho RAID SR2000 - Manual (Page 17)

3. First follow the reverse order of the steps described in
Section 2-5 Installing HDD in Removable Carrier to
remove the damaged HDD, and then replace it with a
new HDD.
4. Insert the Removable Carrier with the new HDD into
the SR2000.
5. Wait a moment. The SR2000 will automatically
perform rebuild function on the new HDD. (Refer to
Chapter 4 Automatic Rebuild Function)
6. Use a sharp pointed object to turn on the buzzer on the
front panel. The Access LED on the lower part of the
panel will be off. (Refer to Note 2).
7. After the rebuild process is over, any data on the newly
installed HDD will be overwritten.
Note1 Alarm functions when buzzer switch is "On".
Note2 Buzzer access LED displays red when buzzer
switch is "Off".
SOHO RAID 16