4 note (read carefully before using sr2000) – Soho RAID SR2000 User Manual
Page 5
Supports the Following OS (no drivers required)
DOS, Windows NT Server, Workstation, Windows
98/95/3.1x, NetWare**3.12/4.1x/5.x, SCO UNIX,
LINUX (RedHat Slackware, Debian, S.U.S.E.,
OPENLinux, TURBOLinux), Free BSD, IBM OS/2,
Solaris 2.x.
1-4 Note (Read carefully before using SR2000)
1.
Use two identical hard disks (same brand name and model)
for optimum performance and greatest convenience.
2.
To obtain optimum performance, use two brand new hard
disks or hard disks in perfect conditions without any
damaged sectors.
3.
Use hard disks with a minimum capacity of 3.2GB Ultra
DMA 33/66.
4.
Easy to use with hard disks manufactured by QUANTUM,
IBM, MAXTOR, or Western Digital.
(see Chapter 6
Certified HDD for SR2000)
5.
Whether it is the upper or lower deck, please set up both
Hard Disks in SR2000 to MASTER mode. (Drive Mode:
HDD Factory Default), or else HDD won’t be detected.
6.
If replacing an old HDD with a new one, please purchase
the same brand and choose a disk capacity greater than or
equal to the original one.
7.
SR2000 will automatically format a new HDD. No need to
use FDISK or FORMAT. Use the Auto-Rebuild Function
or manual Back Up to copy data to the new target HDD.
SOHO RAID
4