Soho RAID SR2000 - Manual (Page 18)

Chapter 4 Automatic Rebuild Function (A.R.F.)
A.R.F. supports Windows NT4.0 Server & Workstation,
Windows 98*/95*/3.1X, Dos 6.22, SCO UNIX System V,
Linux (RedHat, Slackware, Debian, S.u.S.E., OPEN,
Turbo), Novell NetWare** V3.12, V4.1X, V5.X.
In most OS, the A.R.F. is performed in the background in
order to restore rapidly a HDD to its normal read/write
operation.
When the A.R.F. runs under Windows 95/98 during active
DMA, if mouse operation or foreground response should
slow down, please close the DMA and start the A.R.F.
once again.
Please choose optimal hardware and SR2000 compatible
OS. (Refer to Chapter 6 Certified HDD for SR2000).
Please set Operation Mode Switch to NORMAL position
on the control panel before use.
The HDD on the upper deck is designated as the Primary,
the one on the lower deck as the Secondary.
SOHO RAID 17