Soho RAID SR2000 - Manual (Page 19)

4-1 Installing an extra HDD for rebuilding
While the HDD with data is on the upper deck of the
SR2000, start the computer. The computer will
automatically detect the HDD on the lower deck of the
SR2000. In case of abnormal operation, the buzzer will
sound and the LCD will show the following:
1. Insert a new HDD correctly on the lower deck of the
SR2000. Screen will display and buzzer will sound in
case of abnormal operation. If the HDD is properly set
up, the LCD will show the following:
Pri HDD OK
Sec HDD Fail
Pri HDD OK
Sec HDD OK
2. A few seconds later, the LCD will show:
The data in the upper deck’s HDD will be rebuilt in the
lower deck’s HDD.
Rebuilding …
Pri Sec XXX%
XXX%: Percentage completed, ranging from 0~100.
3. When the rebuild is completed, LCD will show:
Pri HDD OK
Sec HDD OK
SOHO RAID 18