Soho RAID SR2000 - Manual (Page 26)

track-by-track and sector-by-sector.
Average copy speed is 4~10 min/GB (or 6~15GB/hour,
according to HDD efficiency).
Sector Copy is faster than the Auto-Rebuild Mode. (Back
Up mode operates at full speed in the SR2000, while
Auto-Rebuild operates in PC background).
Sector Copy Procedure
1. After entering Sector mode and starting operation, the
LCD will show the following:
Copy is being
processed…
2. A few seconds later, the LCD will show the following:
I: 1% is completed.
XXX: percentage completed, ranging from 0~100.
IIIII Wait!
XXX %
3. The LCD will show the following after Sector Copy is
completed:
The LCD will blink and the indicator on the front panel
will turn green.
Copy is done !!
4. To continue operations, please reset the SR2000.
5-3 Auto Copy
Please refer to Section 5-2 Sector Copy for more details.
SOHO RAID 25