Soho RAID SR2000 - Manual (Page 30)

Q5: The buzzer alarm keeps sounding during SR2000
operation.
A: Check if both Removable Carriers (hard disks
installed) on the upper and lower decks are inserted
into the right position. Please refer to section 2-5
Installing HDD in Removable Carrier and section
2-4 Remove/insert Removable Carrier.
Q6: How to turn on/off the buzzer?
A:1. The factory default of the buzzer on/off switch is
ON.
2. Use a sharp pointed object to turn off buzzer alarm
on the front panel (Refer to Section 2-2 Part
Description)
3. Use a sharp pointed object to turn on buzzer alarm on
the front panel.
Q7: Why do the responses of the computer system slow
down when SR2000 is under rebuilding?
A:1. The performance of computer system is related to
CPU, motherboard design and peripherals. SR2000
can slow down PC performance.
2. To save time from new HDD installation, Manual
Back Up is suggested to rebuild data (This process is
not controlled by your PC system)
Q8: Is it possible to lose data or disable performance
when performing BACK UP in the SR2000?
A:1. To avoid data loss from overwriting on source disk,
make sure the source disk is on the upper deck, target
disk on the lower deck.
2. The capacity of the target disk must be larger than the
source disk.
3. Refer to Chapter 5 Manual Back Up.
4. Refer to Chapter 6 Certified HDD for SR2000.
SOHO RAID 29