Setting a start-up/power-off tone, Using voice prompt, Setting up key press echo – Sanyo SCP-6600 User Manual
Page 34: Adjusting the phone’s volume settings
28
2. Your Phone’s Settings
Setting a Start-up/Power-off Tone
To set a Start-up/Power-off tone:
1.
Select
> Settings > Sounds > Others.
2.
Select Start-up Tone or Power-off Tone.
3.
Scroll to your desired tone and press
.
Using Voice Prompt
This feature allows you to hear voice prompts when using Voice
Memo, etc. (default setting is Off).
To enable or disable voice prompt:
1.
Select
> Settings > Sounds > Others > Voice Prompt.
2.
Select On or Off.
Tip:
When ringer volume is set to “Silence All,” voice prompts cannot be heard.
Setting Up Key Press Echo
With this feature, you can hear a voice say the numbers when you
press the keypad.
To turn Key Press Echo on or off:
1.
Select
> Settings > Sounds > Others > Key Press Echo.
2.
Select On or Off.
Adjusting the Phone’s Volume Settings
To adjust your phone's volume settings:
1.
Select
> Settings > Sounds > Ringer/Key Vol.
2.
Select Ringer Volume, Calendar/Alarm, Start-up/Pw-off, or
Key Beep.
3.
Adjust a volume level by pressing the navigation key up or down
and press
.
To adjust the earpiece or speaker volume:
1.
Select
> Settings > Sounds > Receiver Vol.
2.
Select either Earpiece or Speaker.
3.
Adjust a volume level by pressing the navigation key up or down
and press
.