Sanyo SCP-6600 - Manual (Page 82)

76 9. Voice Services
9. Voice Services
Using Voice-Activated Dialing
With a voice tag that you record, your phone will automatically dial a
phone number. Your phone can store up to 30 voice tags.
(To create a voice tag, see “Programming Voice Tags” below.)
Programming Voice Tags
To program a voice tag:
1. From standby mode, press Contacts (right softkey).
2. Select a contact and press .
3. Press Options (right softkey) > Set Voice Tag > Add.
4. After you are prompted to say the name you wish to program,
wait for the beep and then say the name into your phone’s
microphone.
5. Respond to the prompt by repeating the name after the beep.
(The display shows “Voice Tag Recorded.”)
Tip: Record voice tags in a quiet environment and without the aid of an
accessory (for example, a headset or hands-free car kit).
Making a Call Using Voice-Activated Dialing
With the flip open:
1. Press and hold or .
2. Follow the system prompts and recite the entry’s voice tag into
your phone’s microphone.
With the flip closed:
1. Press and hold .
2. Follow the system prompts and recite the entry’s voice tag into
your phone’s microphone.