Display settings, Silence all, Changing the text greeting – Sanyo SCP-6600 User Manual
Page 36: Changing the backlight time length
30
2. Your Phone’s Settings
Silence All
To activate Silence All:
ᮣ
With the flip open, press the Side Volume key down repeatedly
in standby mode. (The screen will display “Silence All”.)
Note:
You can also activate Silence All using the main menu:
1. Select
>
Settings
>
Sounds
>
Ringer/Key Vol.
>
Ringer Volume
.
2. Press the navigation key down until “Silence All” appears on the display and
press
.
Note:
When Ringer Volume is set to “Silence All”, other items are changed to Off
and cannot be highlighted.
To deactivate Silence All:
ᮣ
With the flip open, press the Side Volume key up repeatedly to
select a desired volume level.
Display Settings
Changing the Text Greeting
To display or change your custom greeting:
1.
Select
> Settings > Display > Greeting > Custom.
2.
Enter a custom greeting using your keypad and press
.
Changing the Backlight Time Length
To change the Main LCD or Sub LCD backlight setting:
1.
Select
> Settings > Display > Backlight.
2.
Select Main LCD or Sub LCD.
3.
Select Always On, Always Off, or a preset length of time.
Note:
The
Always On
setting returns to the previous value the next time you turn
on the phone.
To change the Keypad backlight setting:
1.
Select Key after step 1 above.
2.
Select Always Off or a preset length of time.
Note:
Long backlight settings affect the battery’s talk and standby times.