Auto answer mode, Setting the current time, Setting the open/close flip option – Sanyo SCP-6600 User Manual
Page 45
39
2. Your Phone’s Settings
Auto Answer Mode
To set Auto Answer mode:
1.
Select
> Settings > Others > Auto Answer.
2.
Select Hands-free or Speakerphone.
3.
Select either 5 Seconds, 15 Seconds, or Off.
Setting the Current Time
To set the current time when you are in an area with no digital
network:
1.
Select
> Settings > Others > Set Time/Date.
2.
Set the current time and date and press
.
Note:
This feature is only available when you are in an area with no digital
network available.
Setting the Open/Close Flip Option
This feature enables you to answer an incoming call by opening the
flip or to end a call by closing the flip.
To activate the Open Flip feature:
1.
Select
> Settings > Others > Open/Close Flip.
2.
Select Open.
3.
Select Answer Call.
Ⅲ
To deactivate this feature, select No Action.
To activate the Close Flip feature:
1.
From step 2 above, select Close. (You will see a message on the
display.)
2.
Press OK (left softkey) to continue.
3.
Select an option from the following and press
.
Ⅲ
End to end the call.
Ⅲ
Continue (Mute) to continue the call. Your voice is muted,
however you can hear the caller’s voice from the speaker.
Ⅲ
Continue (Unmute) to continue the call. You can hear the
caller’s voice and speak to the phone to answer.
Note:
The Close Flip feature does not apply when you are using the
speakerphone, a headset, or a car kit.