Samsung Digimax L50 - Manual (Page 33)

《33》
Flash ( )/ Left button
[Selecting the Auto flash]
●Flash range (Unit : m)
■When the menu is displayed on the LCD monitor, pressing
the LEFT button makes the cursor shift to the left tab.
■When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH ( ) button.
●Selecting the flash mode
1. Press the M (Mode) button to select a Recording mode
with the exception of Movie clip mode (p.20).
2. Press the Flash button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
●If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first
flash fires to check the shooting condition (Flash range and Power ratio of flash).
Do not move until the second flash fires.
●Using the flash frequently will reduce the life of the battery.
●Under normal operating conditions the charging time for the flash is normally within 4
seconds. If the battery is weak, the charging time will be longer.
●During the continuous shot, AEB and movie clip mode, the flash function will not operate.
●Take photographs within the flash range.
●The image quality is not guaranteed if the subject is too close or highly reflective.
INFORMATION
Auto
WIDE TELE WIDE TELE WIDE TELE
0.8 ~ 2.0 0.8 ~ 1.5 0.25 ~ 0.8 0.3 ~ 0.8 0.25 ~ 2.0 0.3 ~ 1.5
Macro Auto macro
ISO
AUTO