Samsung Digimax L50 - Manual (Page 58)

《58》
Starting play mode
■On camera movie trimming : You can extract desired frames of movie clip during the movie
clip play back.
●If the running time is under 10 seconds, the movie clip can’t be
trimmed.
1. Select a desired movie clip in the play mode.
2. Play back the movie clip by pressing the Play & Pause
button.
3. Press the Pause button at the point of the movie clip that
you want to start extracting.
4. Press the OK button.
5. Press the Play & Pause button and the extracted range will
be displayed on the status bar.
6. Press the Play & Pause button once more at the point
where you wish the extracted file to stop.
7. Press the OK button and a confirmation window will
display.
8. Select a desired sub menu by pressing the Up/ Down
botton and press the OK button.
[TRIM] : the extracted file will be saved.
[CANCEL] : cancels the extracting movie clip
●If the time line bar passes by the start point by pressing the REW(Left) button, the first
frame of the movie clip will display.
●If you doesn’t specify the ending point of the movie clip, the trimming confirmation window
will display at the point of the last frame.
INFORMATION
TRIM:OK
MARK IN:OK CAPTURE:E
TRIMMING?
TRIM
CANCEL
CONFIRM:OK