Samsung Digimax L50 - Manual (Page 74)

《74》
Protecting images
■This is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
●Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [PROTECT]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SELECT] : Only an image that is displayed on the LCD
monitor is protected or unprotected.
[ALL] : All of the stored images are protected or unprotected.
4. Select the desired secondary menu by pressing the
UP/ DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK]
: Sets up the protect function.
- If you select the [SELECT] sub menu at step 3, you
can protect or unprotect another image by pressing the
LEFT/ RIGHT button. If you press the SHUTTER
button, the Image Protection menu will disappear.
- If you protect an image, the protect icon( ) will be
displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from
[DELETE] or [DELETE ALL] functions, but will NOT be
protected from the [FORMAT] function.
PROTECT
SELECT
ALL
MOVE PIC: SET:OK
EXIT:SH1
UNLOCK
EXIT:MENU MOVE: