Button – Samsung Digimax L50 User Manual
Page 45
《45》
+/- button
■You can use the +/- button to adjust the values for the RGB, ISO, white balance and
exposure compensation.
■RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
●Setting RGB Values
1. Press the +/- button, and then use the UP and DOWN
buttons to select the RGB icon ( ).
The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/ Down Button : Navigates between R, G, and B icons.
- Left/ Right Button : Changes value of each icon.
3. When you press the +/- button again, the value you set will
be saved and RGB setup mode will end.
Main menu
Sub menu
Available camera mode
RGB
R (Red), G (Green), B (Blue)
ISO
AUTO, 50, 100, 200, 400
Exposure compensation
-2.0 ~ 0.0 ~ +2.0 (0.5EV steps)
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.