Sharp VL-NZ10S - Manual (Page 57)

42
Useful Features
Using the Remote Control
(Only supplied with VL-NZ10)
Available modes:
All modes
Use the remote control to operate the
camcorder from a distance, such as when you
want to record yourself in a scene, or when the
camcorder is connected to a TV for use as a
VCR.
Notes:
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as this
may prevent the remote control from operating
properly.
• Be sure that there are no obstacles between the
remote control and the remote sensor.
Operating the Remote Control
Aim the remote control at the remote sensor of
the camcorder, and press the control buttons to
operate.
Useful Features
Playback
Turning on the Remote Control
Mode
Available modes:
TAPE-VCR, CARD-VCR
1
In TAPE-VCR or CARD-VCR mode,
press the MENU button until the menu
screen appears.
2
Press l or m on the operation button
to select I, then press the SET button.
3
Press l or m to select “REMOTE”,
then press the SET button.
4
Press l or m to select “ON”, then press
the SET button.
5
Press the MENU button to turn off the
menu screen.
REMO T E ON
O T H E R S
O S D
D E F A U L T
S O U N D
R E MO T E
T I ME C O D E
T C OU T
R E T U RN
O N
O F F
5 m
Remote sensor
Approximate operating
range of remote control
CARD PLAY/MULTI button [p. 73]
CARD REC button [p. 69]
ZOOM buttons (W/T) [pp. 21, 44]
SLOW button [p. 43]
PLAY button
[p. 23]
STOP button
[p. 23]
PAUSE/STILL
button [p. 24]
REW button
[p. 23]
FF button [p. 23]
Advance/reverse buttons [p. 43]
Shift buttons [pp. 44, 73]
VOLUME +/L buttons [p. 24]
DATE button
[p. 45]
T/C (Time Code)
button [p. 59]
TAPE REC START/STOP button [p. 20]