Sharp VL-NZ10S - Manual (Page 71)

Advanced Features
56
4
Press l or m to select “MANUAL”, then
press the SET button to display the
exposure setting screen.
5
Press l or m to select the desired
exposure level.
• The number shown is the selected
exposure level. The adjustment range is
from +5 (least light) to L5 (most light).
6
Press the SET button.
• The selected exposure level is displayed
on the menu screen.
7
Press the MENU button to turn off the
menu screen.
– 5
0
+ 5
E X POSUR E
– 5
+ 5
+ 2
E X POSUR E
E F F E C T
MA N U A L
P I C .
S C E N E ME N U
F U L L A U T O
MA N . F O C U S
W H I T E
E X P O S U R E
S H U T . S P E E D
Q K .
R E T U RN
R E T U RN
B A L .
S E T
O F F
+ 2
To return to Auto Exposure mode
After performing step 1 to 3 above, press l or
m to select “AUTO”, then press the SET button.
To return to Full Auto mode
Set the camcorder to Full Auto mode (see page
54).
Note:
• Manual Exposure mode will cancel if a scene
setting is selected thereafter.
Manual Exposure
Available modes:
TAPE-CAMERA, CARD-CAMERA
The camcorder is preset to Auto Exposure
mode, which automatically selects the optimal
aperture. However, when there is too much
contrast in brightness between the subject and
background, you may not be able to record a
clear image. In this case, use the manual
exposure function to correct the exposure level.
Background is too bright and subject too
dark (backlit subject).
• Increase the exposure level to allow more
light through the lens.
Subject is too bright against background.
• Decrease the exposure level to allow less
light through the lens.
1
In TAPE-CAMERA or CARD-CAMERA
mode, press the MENU button until the
menu screen appears.
2
Press l or m on the operation button
to select T, then press the SET button.
3
Press l or m to select “EXPOSURE”,
then press the SET button.
E F F E C T
MA N U A L
P I C .
S C E N E ME N U
F U L L A U T O
MA N . F O C U S
W H I T E
E X P O S U R E
S H U T . S P E E D
Q K .
R E T U RN
R E T U RN
B A L .
S E T
O F F
A U T O
MA N U A L
Exposure level