Samsung SV-DVD3E EN - Manual (Page 12)

GB
21
GB
20
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 Press the SETUP button on the remote control.
2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the corresponding " or ❷ buttons, until the MANUAL SET
UP option is selected.
5 Press the ENTER button to select this option.
Result:
The TV STATION TABLE menu is displayed.
6 Press the corresponding " or ❷ buttons, until the required preset
TV station is selected. ( PR )
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
" ❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN "❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN "❷!!!! ENTER
Presetting the Stations Manually
☛
You do not need to preset the stations manually if you
have already set them automatically.
1 Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the corresponding " or ❷ buttons, until the MANUAL SET
UP option is selected.
5 Press the ENTER button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
6 Press the " or ❷ buttons to select a programme number as
required.
7 Press the ❿! button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8 Press the ➛ or ❿ buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9 Press the " or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the ❿! button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the " or ❷ button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the ❿ or ➛ buttons
previous character respectively.
12 If you... Then...
Wish to store the ◆ Press the " or ❷! buttons until the MFT
station displayed is selected.
◆ Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
◆ Press ENTER to store the station
Do not wish to ◆ Press the " or ❷ buttons until the
store the station CH is selected.
displayed ◆ Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 12
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
☛
You do not need to preset the stations manually if you
have already set them automatically.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN "❷!!!! ENTER
TV STATION TABLE
PR CH NAME
1
2
3
4
5
" ❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
PR :
CH : ---
MFT : -
NAME : ----
"❷!!! ➛ ❿!!! MEMORY:ENTER
RETURN
MAIN MENU
INSTALLATION
RETURN "❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
VCR VCR