Samsung SV-DVD3E EN - Manual (Page 26)

49
GB
48
GB
A/V Receiver Connections
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
• If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
1 Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
• Optical
• Coaxial
• Use whichever connection is available on your A/V Receiver.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
OR
DVD Setting Up the Display Options
1 With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2 Press the corresponding $ , ❷ or ➛ , ❿ buttons to select the DVD
option.
3 Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
4 Use the $ or ❷ buttons to select Display Options.
Then press the ENTER button.
5 Use the $ or ❷ buttons to select the desired item.
Then press the ➛ or ❿ buttons or then press the ENTER button.
Use the $ or ❷ buttons to select the desired item.
Then press the ENTER button.
• TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
4:3 Letter Box : Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the screen.
4:3 Pan-Scan : Select this for conventional size TVs when you
want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off.)
16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
• Black Level
Adjusts the brightness of the screen.
• Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by
Quasi-PAL mode.
• DVD Out
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
S-Video : Sends S-VIDEO signal to the S-JACK.
➢
• How to make the SETUP MENU disappear or return to
menu screen during set up: Press the RETURN button.
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN $❷!!!! ENTER
MAIN MENU
DVD SETUP
RETURN $❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language DVD
RETURN $❷
DISPLAY OPTIONS
TV Aspect 4:3 L-Box
Black Level Low
Quasi-PAL Off
DVD Out Component
DVD