Snom 320 - Manual (Page 67)

snom technology AG • 67
Settings
A long list of different settings is available, which can be used to
control the behavior of the snom 320. These settings are explained in the
white paper “Confi guring snom phones for Mass Deployment”, which you
will fi nd at http://www.snom.com. The white paper “How can I update
a snom phone?” describes the different options available to update the
phone, also via settings fi le.
You can specify and change the settings via the phone or the
phone’s webpage.
Settings via Phone
For the settings that can be adjusted via the phone, see the
section Menu in the chapter Basic Functions, above. Additional settings
can be adjusted only via the phone’s webpage which is usually quicker
and more convenient to use anyway.
Settings via Web Browser
The snom 320 has an integrated webpage for this purpose. If the
phone is connected to a network that provides DHCP, it can be accessed
via the browser immediately after boot-up. If you do not want to use
DHCP, you must specify IP address, netmask, gateway, DNS domain, and
DNS server statically to ensure correct operation.
6