Sunrise Global 13-05024 - Manual (Page 15)

14
INSTALLATION LOCATION
INDOOR UNIT
1. The inlet and outlet should not be covered so that the outflow air can reach all parts of
the room.
2. Install in a location where is permitting easy connection with the outdoor unit.
3. A location from which the condensation water can be drained out conveniently.
4. Avoid a location where there is heat source, high humidity or inflammable gas.
5. Install in a location where is strong enough to withstand the full weight and vibration of
the unit.
6. Be sure that the installation conforms to the installation dimension diagram.
7. Be sure to leave enough space to allow access for routine maintenance.
8. Install in a location where is a least 1 m (39-3/8”) from other electric appliances such as
television, audio device, etc.
9. Select location where is easy to remove and clean the filter.
OUTDOOR UNIT
1. Select location from which noise and outflow air emitted by unit will not inconvenience
neighbors.
2. Select location where there should be sufficient ventilation.
3. The inlet and outlet should not be covered.
4. The location should be able to withstand the full weight and vibration of the outdoor unit.
5. There should be no danger of flammable gas or corrosive gas leaks.
6. Be sure that the installation conforms to the installation dimension diagram.
7. Please verify with your local authority if the installation of this unit is permitted.