Silvercrest KH 2450 - Manual (Page 18)

20
To increase the playback sound volume: Press the function button B
e
.:
With each press of the button you raise the playback sound volume by a step.
For a faster raising of the playback sound volume you can also hold down the
function button B
e
.
To reduce the playback sound volume: Press the function button C
r
. With each
press of the button you reduce the playback sound volume by a step. For a faster reduction
of the playback sound volume you can also hold down the function button C
r
.
The currently adjusted volume level is indicated for a few seconds in the display
q
.
7.5.3 Adjusting the playback speed
The playback of saved dictation recordings can take place at two speeds:
Ú normal speed
Ú one and a half times speed
The standard factory setting is normal playback speed.
1
To switch to a one and a half times playback speed: Select it during playback
by pressing the function button D
t
» 1.5«. Playback now takes place at one
and a half times normal speed.
2
To switch back to normal playback speed: Select it by pressing the function
button D
t
» 1.0«. Playback now takes place again at normal speed.
7.5.4 Fast forward/rewind
‹
] noTICe:
›
During fast forward/rewind there is no sound playback.
To select passages of the dictation recording in fast forward during playback:
1
Place the multi-function slider
h
at » FFWD« and hold it in this position;
in the display
q
is indicated:
Bedienungsanleitung KH 2450 EN.indd 20 23.12.2008 23:09:41