Silvercrest KH 2450 - Manual (Page 34)

36
7
Select, by pressing the function button C
r
, »VA on«. Subsequently select, by
pressing the function button D
t
, »OK«. In the display
q
the Menu is once
again shown; to return to the start screen: select, by pressing the function
button A
w
twice in succession, »ESC«.
When voice activation is switched on, on the start screen and during dictation
recordings »va« is indicated in the display
q
:
Free 05:43h
no dictations
Menu NEW
v a
To switch »voice activation« off: Follow the steps 1 to 6 in this chapter.
Then select »VA off« in step 7 by pressing function button B
e
.
8.6 Microphone sensitivity
The microphone in this voice recorder can be set to two sensitivity levels,
»Dictation« and »Conference«:
Ú Select »Dictation« when the voice recorder is to be used for dictation record-
ings by a single speaker.
Ú Select »Conference« when conversations are to be recorded.
To programme the microphone sensitivity:
1
Switch the voice recorder on by pressing the button »ON/OFF«
a
.
As soon as the start screen is shown in the display
q
:
2
Place the multi-function slider
h
at » STOP«.
3 Then select, by pressing the function button D
t
, »Menu«.
In the display
q
is indicated:
Bedienungsanleitung KH 2450 EN.indd 36 23.12.2008 23:09:43