Silvercrest KH 2450 - Manual (Page 44)

46
6
Select, by pressing the function button B
e
or C
r
, »Off« or »Auto«. Subse-
quently select, by pressing the function button D
t
, »OK«. In the display
q
the programming Menu is once again shown. To return to the start screen: Se-
lect, by pressing the function button A
w
twice in succession, »ESC«.
8.11 Selecting the recording mode
This voice recorder can record dictations with three varying sampling rates. The
higher the sampling rate, the better the quality of the dictation recording; however,
at the same time, the requirement for memory space for dictation recording rises
accordingly.
Selection can be made from three sampling rates for dictations recordings:
Ú »HP« – highest quality level, dictations require a lot of memory space
Ú »SP« – standard quality level; optimal compromise between the demands on
quality and memory space
Ú »LP« – lowest quality level; dictations require very little memory space; recom-
mended for very long dictations
From the factory, »SP« is set as the sampling rate. To change the setting of the sam-
pling rate:
1 Switch the voice recorder on by pressing the button »ON/OFF«
a
.
As soon as the start screen is shown in the display
q
:
2 Place the multi-function slider
h
at » STOP«.
3
Then select, by pressing the function button D
t
, »Menu«.
In the display
q
is indicated:
OK ESC
Delete
Folder
No./Ref.
Bedienungsanleitung KH 2450 EN.indd 46 23.12.2008 23:09:45