Silvercrest KH 2450 - Manual (Page 20)

22
7.6 Handling recorded dictations
7.6.1 Overwriting passages in a recorded dictation
You can amend saved dictations at any point; for this, simply start a new dictation
recording at the desired point:
1 Switch the voice recorder on by pressing the button »ON/OFF«
a
.
As soon as the start screen is shown in the display
q
:
2 Place the multi-function slider
h
at » STOP«.
3
Should there be several dictations extant: Select the one you want by press-
ing the function buttons B
e
/C
r
»DICT ±« to switch between the saved
dictations. When the designation of the dictation recording to be amended is
shown in the display
q
:
4 Place the multi-function slider
h
at » START«. The selected dictation re-
cording is now played back. As soon as the point is played back at which you
wish to amend the dictation recording:
5 Press the button » DICT«
g
; as soon as »Record« is indicated in the display
q
you can start your new dictation recording. During the dictation recording
the lapsed period of the dictation recording is continuously indicated in the
display
q
. The status lamp »DICT «
d
glows permanently during the dic-
tation recording.
6 When you wish to interrupt the dictation recording: Place the multi-function
slider
h
at » STOP«. In the display
q
»Record Pause« is indicated, the hith-
erto period of the dictation recording remains shown. For as long as the dicta-
tion recording is interrupted, the status lamp »DICT « blinks.
To continue the dictation recording: Place the multi-function slider
h
back at
» START«.
7
When you wish to terminate the dictation recording:
Press the button » DICT«
g
once. The status lamp »DICT «
d
goes out.
7.6.2 Inserting a passage into a recorded dictation
1 Switch the voice recorder on by pressing the button »ON/OFF«
a
.
As soon as the start screen is shown in the display
q
:
Bedienungsanleitung KH 2450 EN.indd 22 23.12.2008 23:09:41