SUPER MICRO Computer 6015W-UR - Manual (Page 3)

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It pro-
vides information for the installation and use of the SuperServer 6015W-UR/6015W-
U/6015W-NTR/6015W-NT. Installation and maintenance should be performed by
experienced technicians only.
The SuperServer 6015W-UR/6015W-U/6015W-NTR/6015W-NT is a high-end
server based on the SC815TQ-R650U/SC815TQ-560U 1U rackmount chassis
and the Super X7DWU, a dual processor serverboard that supports Intel ® Xeon ®
5400/5300LV/5200/5100LV series processors at a Front Side (System) Bus speed
of 1600/1333/1066 MHz and up to 64 GB of ECC FBD DDR2-800/667 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X7DWU serverboard and
the SC815TQ-R650U/SC815TQ-560U chassis, which comprise the SuperServer
6015W-UR/6015W-U/6015W-NTR/6015W-NT.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6015W-UR/
6015W-U/6015W-NTR/6015W-NT into a rack and check out the server confi guration
prior to powering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.