SUPER MICRO Computer 6015W-UR - Manual (Page 91)

Chapter 7: BIOS
7-23
Set User Password
When the item "Set User Password" is highlighted, hit the <Enter> key. When
prompted, type the user's password in the dialogue box to set or to change the
user's password, which allows access to the system at boot-up.
Password on Boot
This setting allows you to determine if a password is required for a user to enter the
system at system boot. The options are Enabled (password required) and Disabled
(password not required).
TPM (Trusted Platform Modules) Support
Select Enabled to enable support for trusted platforms and allow the BIOS to
automatically download the drivers needed to provide support for the platforms
specifi ed. The options are Enabled and Disabled. If set to Enabled, the TPM State
screen displays.
Current TPM State
This item shows the current TPM State only.
Change TPM State
Select Enabled & Activate to enable TPM support for the system. Select De-activate
& Disabled to disable the function of TPM support. If No Change is selected, no
changes will be done to the current TPM State. Select Clear to clear or erase all
information related to TPM support. If set to Clear, the sub-menu Physical Presence
Operations will appear. Select Reject to cancel the selection. Select Execute to
proceed with selection. All information related to TPM Support will be erased.