SUPER MICRO Computer 6015W-UR - Manual (Page 82)

7-14
S UPER S ERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual
Snoop Filter
Select Enabled to eliminate snoop traffi c to the graphics port to greatly improve
system performance when running graphics intensive applications. The options
are Enabled and Disabled.
Crystal Beach Features
This feature was designed to implement Intel's I/O AT (Acceleration Technology)
to accelerate the performance of TOE devices. (A TOE device is a specialized,
dedicated processor that is installed on an add-on card or a network card to
handle some or all packet processing of the add-on card. For this motherboard,
the TOE device is built inside the ESB2 South Bridge chip.) Options are Enabled
and Disabled.
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to.
The options are PCI and LPC.
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Frequency Ratio (Available when supported by the CPU)
This feature allows the user to set the internal frequency multiplier for the CPU.
The options are Default and x12.
Machine Checking (Available when supported by the CPU)
Set to Enabled to use this function, which allows the CPU to detect and report
hardware (machine) errors via a set of model-specifi c registers (MSRs). The options
are Disabled and Enabled.
Fast String Operations (Available if supported by the CPU)
Set to Enabled to enable the fast string operations for special CPU instructions.
The options are Disabled and Enabled.
Thermal Management 2 (Available if supported by the CPU)
Set to Enabled to use Thermal Management 2 (TM2) which will lower CPU voltage
and frequency when the CPU temperature reaches a predefi ned overheat thresh-
old. Set to Disabled to use Thermal Manager 1 (TM1), allowing CPU clocking to be