SUPER MICRO Computer 6015W-UR - Manual (Page 72)

7-4
S UPER S ERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual
IDE Channel 0 Master/Slave and Secondary IDE Master/
Slave
These settings allow the user to set the parameters of IDE Channel 0 Master/Slave
and Secondary IDE Master/Slave slots. Press <Enter> to activate the following
submenu screen for detailed options of these items. Set the correct confi gurations
accordingly.
The following items will be displayed in the submenu:
Type
Selects the type of IDE hard drive. The option Auto will allow the BIOS to auto-
matically confi gure the parameters of the HDD installed at the connection. Enter a
number between 1 to 39 to select a predetermined HDD type. Select User to allow
the user to enter the parameters of the HDD installed. Select CDROM if a CDROM
drive is installed. Select ATAPI if a removable disk drive is installed.
CHS Format
The following items will be displayed by the BIOS:
Type: This item displays the type of IDE or SATA device.
Cylinders: This item indicates the status of cylinders.