Sharp Z-336J - Manual (Page 186)

15-32
Chapter 15: Appendix
15
Transceiver (connector type)
Install the transceiver connector on a coaxial cable. Then, connect the transceiver to the connector.
No special tools are needed for this connection, and it is easy to install and remove.
The transceiver must be supplied with power from a node through a transceiver cable.
Transceiver (connector type) for Ethernet cable
Coaxial cable
An example of an AUI external
power input terminal block
12 VDC
(Depending on the model used)
12 VDC
external
power
supply
AUI connector
D-sub 15-pin
Transceiver
Transceiver cable
(AUI cable)