Sharp Z-336J - Manual (Page 138)

11-8
Chapter 11: SEND/RECEIVE function
11
11-2 Timeout time for SEND/RECEIVE instructions
Enter a timeout time for the SEND/RECEIVE functions in the parameter at address 60
(8)
.
Timeout time parameter
- The specified timeout time will be effective for all target nodes.
- The allowable range is 0.01 (0.1 sec.) to 255 (25.5 sec.), in decimal notation. (In units of 0.1 sec.)
- The default value of 00
(H)
is 1 sec.
Address (8) Detail
60 Timeout time for SEND/RECEIVE instructions (0.1 to 25.5 sec.)