2) participating node management table, 3) network management table, 2) participating node management table -14 – Sharp Z-336J User Manual

Page 48: 3) network management table -14

Advertising
background image

7-14

Chapter 7: Computer Link Function

7

(2) Participating node management table

The participating node management table contains data related to the nodes currently participating
in the network.

Participating node management table

- "0x1ff" is the hexadecimal notation for 1FF

(HEX)

.

- For details about the participation node management table maintained by the JW-50FL, see

page 10-6.

(3) Network management table

The network management table contains information common to the network.

Network management table

- For details about the network management table maintained by the JW-50FL, see page 10-6.

Item

Number

of bytes

Description

Node number

1 byte

1 to 254

Upper layer status

2 bytes RUN/STOP/ALARM/WARNING/NORMAL

Area 1 of common memory: Data top
address

2 bytes Word address (0 to 0x1ff)

Area 1 of common memory: Data size

2 bytes Size (0 to 0x1ff)

Area 2 of common memory: Data top
address

2 bytes Word address (0 to 0x1fff)

Area 2 of common memory: Data size

2 bytes Size (0 to 0x1fff)

Allowable refresh cycle time

2 bytes In units of 1 msec.

Token monitor time

1 byte

In units of 1 msec.

Minimum separation of frames

1 byte

In units of 100 µsec.

Link status

1 byte

Participate/leave

Item

Number

of bytes

Description

Token latch node number

1 byte

Currently token staying node.

Minimum separation of frames

1 byte

In units of 100 µsec.

Allowable refresh cycle time

2 bytes In units of 1 msec.

Measured refresh cycle time (current value)

2 bytes In units of 1 msec.

Measured refresh cycle time (maximum value)

2 bytes In units of 1 msec.

Measured refresh cycle time (minimum value)

2 bytes In units of 1 msec.

Advertising
This manual is related to the following products: