Sharp Z-336J - Manual (Page 83)

9-6
Chapter 9: Message transfers
9
(2) For the JW30H or J-board (Z-500 series)
- The relationship between the control module (on which the memory module is installed) and the file
memory is as follows.
* File memory of J-board (Z-500 series) is the same as that of JW-32CUH1.
Note: Be careful not to allow the transmission buffer area to overlap with the common memory area.
Allocation available data memory address
for the transmission buffer
Bit address
(8)
Byte address
(8)
File address
(8)
File 0
Relay 00000 to 15777 0000 to 1577 000000 to 001577
TMR/CNT contact point T-C0000 to T-C0777 1600 to 1777 001600 to 001777
TMR/CNT/MD current value --- b0000 to b1777 002000 to 003777
Register ---
09000 to 09777 004000 to 004777
19000 to 19777 005000 to 005777
29000 to 29777 006000 to 006777
39000 to 39777 007000 to 007777
49000 to 49777 010000 to 010777
59000 to 59777 011000 to 011777
69000 to 69777 012000 to 012777
79000 to 79777 013000 to 013777
89000 to 89777 014000 to 014777
99000 to 99777 015000 to 015777
E0000 to E5777 016000 to 023777
Register
(Possible to register error history)
--- E6000 to E7777 024000 to 025777
TMR/CNT current value --- b2000 to b3777 026000 to 027777
Expansion relay 20000 to 75777 2000 to 7577 030000 to 035577
TMR/CNT contact point T-C1000 to T-C1777 7600 to 7777 035600 to 035777
File 1 --- --- 000000 to 037777
File 2 --- --- 000000 to 177777
File 3 --- --- 000000 to 177777
File 10
(H)
--- --- 000000 to 177777
to to to to
File 14
(H)
--- --- 000000 to 177777
to to to to
File 2C
(H)
--- --- 000000 to 177777
Control module File memory
JW-31CUH1 File 0
JW-32CUH1 *
File 0, 1, and 2
(File 2 can be allocated to 000000 to 177777 or 000000 to 077777)
JW-33CUH1 File 0, 1 to 3
JW-33CUH2 File 0, 1 to 3 and 10 to 14
(H)
JW-33CUH3 File 0, 1 to 3 and 10 to 2C
(H)