Siemens CP 343-1 - Manual (Page 40)

7 Web Diagnostics
B3L−40
CP 343-1 Lean for Industrial Ethernet / Manual Part B3L
Release 03/2007
C79000-G8976-C198-04
7.2.5 Industrial Ethernet
“Parameters” Tab
This page shows you the various parameters of the MAC address, the IP address
and the LAN attachments.
Parameter Function
Network attachment
MAC address
(active)
Active MAC address of the CP
MAC address
(factory setting)
MAC address set in the factory
Device name Device name configured in STEP 7 (properties dialog, “PROFINET” tab)
IP parameters
IP address IP address of the CP
Subnet mask Configured subnet mask
Default router IP address of a configured router
IP settings How the IP address is assigned (for example, STEP 7, DHCP ...)
Physical properties
Port number Number of the LAN port of the CP: 1, 2
Link status Status of the LAN port:
S OK
S no link
Setting Display of the individual network settings configured in STEP 7:
S Configured
S automatic (automatic setting / autonegotiation)
Mode Displays the current network properties (transmission rate and direction). Possible
values:
S 10 Mbps half duplex
S 10 Mbps full duplex
S 100 Mbps half duplex
S 100 Mbps full duplex