8 compatibility with predecessor products, 1 extended functionality, B3l−44 – Siemens CP 343-1 User Manual
Page 44
8 Compatibility with Predecessor Products
B3L−44
CP 343-1 Lean for Industrial Ethernet / Manual Part B3L
Release 03/2007
C79000-G8976-C198-04
8 Compatibility with Predecessor Products
8.1
Extended Functionality
New: Enhanced functions compared with module 6GK7 343−1CX10−0XE0 with
firmware version V1.0
The following properties, services and functions are new:
S Web diagnostics
S New GSDML file
8.2
Replacing Older Modules / Replacing Faulty Modules
Use as a Replacement:
The CP 343−1 Lean with order number 6GK7 343−1CX10−0XE0 (firmware version
2.0) described here can be used as a replacement for the following predecessor
products:
S CP 343−1 Lean (6GK7 343−1CX00−0XE0)
If you replace a CP 343−1 Lean (CX00) module with a CP 343−1 Lean (CX10)
and have STEP 7 version < V5.4, all the previous functions of the module
remain available. Any port settings relating to Ethernet are adopted for port 1.
The additional second RJ−45 port is also available in the “Automatic setting”
mode.
S CP 343−1 Lean (6GK7 343−1CX10−0XE0, firmware version 1.0)
All previous functions remain available. They are supplemented by the functions
of Web diagnostics.
Notice
For new user programs, please make sure that you always use the latest block
versions. You will find information on the latest block version and links to download
the current blocks on the Internet: