Sennheiser WiCOS - Manual (Page 17)

15
Overview of the components
Multi-function display 7 of the WiCOS CV chairman unit
The multi-function display 7 can display three different operating modes.
To switch between the operating modes and displays:
̈
Press the ABSTAIN key C for approx. 3 seconds.
You can switch between the following modes and displays:
– Voting mode (“ Start/Stop Voting ”)
– Volume adjustment mode for loudspeakers (“ Volume Control ”) and
– Media control mode (“ Function key ”).
Depending on the mode, the selection key A 8 and the selection
key B 9 are assigned different functions.
The display has an automatic brightness control. Approx. 4 seconds after
the last key press, the brightness will be reduced. With each key press, the
display will light up with maximum brightness.
9
C
8
7
You can also switch between the operating modes using the web
server (see page 65).
Voting mode
“Start/Stop Voting”
Display Function/Meaning
L Start Selection key B 9 starts a voting session
M Stop Selection key A 8 stops a voting session
Volume adjustment mode for
loudspeakers “Volume Control”
Display Function/Meaning
N Volume of the
conference units’
loudspeakers Adjusted volume of the conference units’ loudspeakers K
Selection key A 8 increases the volume
Selection key B 9 reduces the volume
Media control mode
“Function key”
Display Function/Meaning
O Media control 1 Selection key A 8 controls external media devices
P Media control 2 Selection key B 9 controls external media devices
L M
N
O P