Sennheiser WiCOS - Manual (Page 48)

Configuring the conference system
46
Microsoft Windows XP
operating system
If you are using Microsoft Windows XP , proceed as follows in order to set a
static IP address (see also the instruction manual of the operating
system):
̈
Click “Start” and select “Control Panel”.
The “Control Panel” window opens.
̈
Click “Network Connections“
A list of all the network connections on the computer appears.
̈
Right-click “Local Area Connection”.
A shortcut menu appears.
̈
On the shortcut menu, click “Properties”.
The “Local Area Connection Properties” window appears.
̈
Select “Internet Protocol (TCP/IP)” and click the “Properties” button.
The “Internet Protocol (TCP/IP) Properties” window appears.
̈
Click the “Use the following IP address” option button.
̈
In the “IP address” field, type your desired IP address, e.g.
192.168.0.12.
̈
In the “Subnet mask” field, type the subnet mask 255.255.255.0.
Both addresses have to be within the address range of the access point.
̈
Confirm your entries by clicking “OK”.
Do not use the IP address of the access point: 192.168.0.10.