Sennheiser WiCOS - Manual (Page 43)

41
Running a conference
If you are using the WiCOS C chairman unit, the set operating mode of the
conference unit and the voting result cannot be displayed. You can
nevertheless conduct voting session.
̈ Via the web server, set the function of the selection key A 8 and B 9
to “ Start/Stop Voting ” (see page 65).
̈
Start or stop voting session and delete voting results using the
selection key A
8 and B 9 (for more information, see page 38).
As long as you keep the key 8 or 9 pressed, the LEDs next to the keys
light up.
Setting the volume of the conference units’ loudspeakers
With the WiCOS CV or WiCOS C chairman units, you can set the loudspeaker
volume of all conference units.
If you are using the WiCOS CV chairman unit:
̈ Keep the ABSTAIN key C pressed until the “volume adjustment mode
for loudspeakers” is shown on the multi-function display 7 .
The multi-function display switches between “voting mode”, “volume
adjustment mode for loudspeakers” and “media control mode”.
̈
Press the
– selection key A 8 to increase the loudspeaker volume or
– selection key B 9 to reduce the loudspeaker volume.
The loudspeaker volume is changed. The multi-function display 7
shows the volume of the conference units’ loudspeakers N .
If you are using the WiCOS C chairman unit:
̈
Via the web server, set the function of the selection key A 8 and B 9
to “ Volume Control ” (see page 65)
9 8
C CV D DV
With the WiCOS C chairman unit, you cannot participate in the
voting session yourself.
C
7
CV
C CV D DV
You can also switch between the operating modes using the
web server (see page 65).
9 8 7
C CV D DV
N
7