Installation 2 – Speco Technologies SIPSD37X User Manual
Page 12
37X Speed Dome Camera
12/50
Communication Protocol Setup
1
2
3
4
ON
ON
z
Select an appropriate Protocol with the DIP switch combination.
Switch Mode
P0
(Pin 1)
P1
(Pin 2)
P2
(Pin 3)
Protocol
OFF OFF OFF
PELCO-D,
2400
bps
ON
OFF
OFF
PELCO-D, 9600 bps
OFF ON OFF
PELCO-P,
4800
bps
ON
ON
OFF
PELCO-P, 9600 bps
Others Reserved
z
Match the camera protocol with the camera protocol in the setting of
your DVR or controller to control the camera.
z
Adjust the DIP switch after turning off the camera. If you changed the
camera protocol by changing the DIP S/W, the change will be effective
after you reboot the camera.
z
The factory default protocol is “Pelco-D, 2400 bps”. (HTSD37X)
z
The factory default protocol is “Pelco-D, 9600 bps”. (SIPSD37X)
INSTALLATION 2