Osd menu 4 – Speco Technologies SIPSD37X User Manual
Page 25
37X Speed Dome Camera
25/50
Quick Programming Guide
z
The menu items with < > always have sub-menus.
z
To go to submenus or make the cursor move to the right, press NEAR key.
z
To go to the previous-upper level menus, press FAR key.
z
To make a selection, press NEAR key
z
To cancel a selection, press FAR key
z
To move the cursor in the menu, use the joystick to the Up/Down direction or Left/Right
direction.
z
To change a value of an item, use Up/Down of the joystick in the controller.
z
To save changes, press NEAR key.
z
To cancel changes, press FAR key.
Main Menu
SPEED DOME CAMERA
------------------------
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME CAMERA SETUP>
<SYSTEM INITIALIZE>
EXIT
z
System
Information
Displays the system information and
configuration. The system setting can
not be changed using the OSD menu
and the information is for reference
only.
z
Display Setup
Enables the user to program how labels
are displayed on the monitor.
z
Dome Camera
Setup
Enables the user to configure various
functions of the camera.
z
System Initialize Initializes all system configurations and
all data to the factory default
parameters.
OSD MENU 4